TP-LINK TD-W8970N Benutzerhandbuch
TD-W8970N
Wireless N ADSL2+ Modem Router User Guide
To add static routing entries:
1. Click
the
Add
Figure 4-50
2. Enter the following data:
¾
Destination Network Address:
The Destination Network Address is the address of the
network or host that you want to assign to a static route.
¾
Subnet Mask:
The Subnet Mask determines which portion of an IP Address is the network
portion, and which portion is the host portion.
¾
Use Interface:
Select the Interface name in the text box, or else, the default Use Interface will
be adopted for the Static Route.
¾
Use Gateway IP Address:
If you select the IPoE or IPoA mode for Use Interface, the
screen above will display this item, you should type the Gateway address correctly, and the
other option for Use Interface will adopt the default Gateway address for the Static Route.
other option for Use Interface will adopt the default Gateway address for the Static Route.
3. Click
Save/Apply
to and then you will see you settings as shown in Figure 4-49.
To remove a static routing entry:
1. Select
the
Remove
2. Click
the
Remove
button, and the entry will be deleted.
)
Note:
Gateway IP address should be correctly configure
d if IP based Interface (IPoE, IPoA) i
s selected.
4.4.9.3 RIP
Choose “Advanced Setup”Æ“Routing”Æ“RIP”, you can see the RIP (Routing Information
Protocol) screen which allows you to configure the RIP (shown in Figure 4-51).
Protocol) screen which allows you to configure the RIP (shown in Figure 4-51).
51