TP-LINK TL-WR843ND Benutzerhandbuch

 

- 5 - 

 

Figure 1-2    Rear Panel sketch 

The following parts are located on the rear panel (View from left to right). 



 

ON/OFF: The switch for the power. 



 

POWER: The Power socket is where you will connect the power adapter. Please use the 

power adapter provided with this TL-WR843ND 300Mbps Wireless AP/Client Router. 



 

4,3,2,1 (LAN): These ports (4,3,2,1) connect the Router to the local PC(s). 



 

INTERNET: This INTERNET port is where you will connect the DSL/cable Modem, or 

Ethernet. 



 

ROUTER WISP: This switch is used to select working mode. 



 

WPS/RESET:  This button is used for both WPS and Reset function. To use the WPS 

function, press it for less than five seconds; to use the RESET function, press it for more 

than five seconds.   



  Used as RESET button: 

There are two ways to reset to the Router's factory defaults: 

1) Use the Factory Defaults function on System Tools → Factory Defaults page in the 

Router's Web-based Utility. 

2) Use the WPS/RESET button: With the Router powered on, press and hold the 

WPS/RESET button (more than 5 seconds) until the SYS LED becomes quick-flash from 

slow-flash. Then release the button and wait the Router to reboot to its factory default