TP-LINK TL-WR843ND Benutzerhandbuch

 

- 7 - 



 

Broadband Internet Access Service (DSL/Cable/Ethernet) 



 

One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is 

connected directly to the Ethernet.) 



 

PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors   



 

TCP/IP protocol on each PC 



 

Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari 



 

Place the Router in a well ventilated place far from any heater or heating vent   



 

Avoid direct irradiation of any strong light (such as sunlight) 



 

Keep at least 2 inches (5 cm) of clear space around the Router 



 

Operating Temperature: 0 ~40  (32 ~104 )

℃

℃

℃

℃

 



 

Operating Humidity: 10%~90%RH, Non-condensing 

To connect the Router, please follow the steps below: 

1)  Locate an optimum location for the Router. The best place is usually at the center of your 

wireless network. The place must accord with the 

2)  Adjust the direction of the antenna. Normally, upright is a good direction. 

After finishing the steps above, please choose the working mode you need and carry out the 

corresponding steps. There are two working mode supported by this router: WISP Client Router 

and Standard Wireless Router.