Printek Mt3-II Benutzerhandbuch

9 

 

 

 

 

Green 

Printer is on and ready to receive data via the RS-232C 
port or the IrDA interface. 
When using RS-232C, pressing the On/Off button will 
turn the printer on.  After approximately 20 seconds, if no 
instructions are sent, the printer will automatically turn 
off to conserve battery life. 
When using IrDA, the printer will stay on all the time.  
Pressing the On/Off button again will turn the printer off. 

Blue 

Printer is on and ready to receive data via either the 
Bluetooth or Wi-Fi interface (optional). 

Power: 

 

Yellow 

Low power.  Battery needs to be recharged. 

Battery: 

 

Yellow 

The battery charger is charging the battery at a fast rate.  
If the battery is below 5.0V, the battery is being “trickle” 
charged until the battery voltage reaches 5.0V, and then 
the fast charge rate is started.  The indicator will turn Off 
when the battery is fully charged.   

Green 

MCR is ready to accept data. 

Error / MCR: 

     

     

 

Red 

Red Indicates a fault condition or a printer error.  The 
printer is not ready to accept data. 
Refer to the troubleshooting guide to determine error or 
fault condition.