Kodak 8670 Benutzerhandbuch

Troubleshooting

9-6

Part No. 6B4389  June 1999

If you cannot print from a Macintosh computer with AppleTalk, 
check the following:

1.

Make sure that you are running Phase 2 AppleTalk and that 
you have selected the correct network interface from the 
Network Control Panel on the Macintosh.

2.

If you have a large network, make sure that you have the 
AdobePS, LaserWriter 8.xx, or equivalent driver since earlier 
versions may cause PostScript errors. Verify that you get the 
correct printer information when you select Printer Info from 
the Setup button in the Chooser.

3.

Make sure that you have selected the correct Printer 
Description File from the Chooser.

4.

Verify that you selected the correct AppleTalk zone. Because 
the NIC receives its zone information from router broadcasts, 
it may not be in the zone you expect and will not show up in 
the Choose. You may need to force the zone name with the 
SET APPLETALK ZONE command.

5.

If you are running an old version of Macintosh OS, verify that 
the Laser Prep versions on all Macintosh computers that 
need to print to the NIC are the same.

If you are having trouble printing with Windows NT, check the 
following:

1.

Make sure that you can ping the NIC using the DOS 
command PING

 ipaddress where ipaddress is the IP address 

of the NIC. 

2.

Make sure that TCP/IP is installed and running on the 
Windows NT system.