Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Sony
  4. Micro Hi-Fi System with Giga Juke Hard Drive
  5. Benutzerhandbuch

Sony Micro Hi-Fi System with Giga Juke Hard Drive NAS-50HDE Benutzerhandbuch

Produktcode
NAS-50HDE
Download
Seite von 119
NAS-50HDE.GB.2-890-157-11(1)
50
GB
Transferring tracks to a “WALKMAN” 
(ATRAC AD)
Notes
 Make sure that you do not disconnect the USB 
cable while transferring tracks to a “WALKMAN” 
(ATRAC AD). If you do, the unit or the 
“WALKMAN” (ATRAC AD) may malfunction.
 With the procedures in this section, you may 
not be able to transfer tracks in the case of some 
“WALKMAN” models. In this case, select USB 
storage device as the transfer destination. See 
“Transferring tracks to a USB storage device” on 
page 51 for details. Refer to the customer support 
site of Sony Europe, http://support.sony-europe.
com/ (for the customers in Europe only) for 
details on the compatible models and compatible 
functions for each model.
 If two “WALKMAN” (ATRAC AD) models are 
connected to both jacks (rear and front) at the 
same time, the device connected to the front jack 
takes priority.
Quick mode
In this mode, tracks that were saved to 
the HDD Jukebox after the last transfer 
are automatically selected. Since the unit 
recognizes each “WALKMAN” (ATRAC 
AD) that was ever connected to it, the unit 
has the transfer record of each one.
1 
Connect the “WALKMAN” (ATRAC AD) 
to a USB connecting jack on the unit.
Refer to the operating manual of the 
“WALKMAN” (ATRAC AD) as well.
USB connector
Front or rear of the main unit
To the USB 
connecting jack
To the USB 
connecting jack
“WALKMAN” 
(ATRAC AD)
USB cable supplied 
with the “WALKMAN” 
(ATRAC AD)
2 
Enter the Function menu and select 
[HDD JUKEBOX].
Make sure the TRANSFER button is set 
to “WALKMAN” (ATRAC AD) (page 
49).
3 
Press TRANSFER on the remote 
control or the main unit.
4 
Make sure the groups that have not 
been transferred are checked 
.
Uncheck any group you do not want to 
transfer.
Remaining space of the connected device
5 
Select [Execute] or press TRANSFER.
Standard mode
1
Connect the “WALKMAN” (ATRAC AD) to a 
USB connecting jack on the unit.
2
Enter the Function menu and select [HDD 
JUKEBOX].
3
Select the album, playlist, or group that you 
want to transfer.
4
Enter the Option menu and select [Transfer] 
– [“WALKMAN”] – [Standard mode].
5
Select [Execute].