Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Sony
  4. Micro Hi-Fi System with Giga Juke Hard Drive
  5. Benutzerhandbuch

Sony Micro Hi-Fi System with Giga Juke Hard Drive NAS-50HDE Benutzerhandbuch

Produktcode
NAS-50HDE
Download
Seite von 119
NAS-50HDE.GB.2-890-157-11(1)
1
GB
Tips
 If any of the tracks are registered in the Trash 
Bin of the “WALKMAN” (ATRAC AD), a 
confirmation message will appear on the unit and 
the “WALKMAN” (ATRAC AD).
 If the playlist is transferred from the HDD 
Jukebox to the “WALKMAN” (ATRAC AD), the 
playlist will also be recognized as a playlist of the 
“WALKMAN” (ATRAC AD).
Notes
 If the AC power adaptor is supplied with the 
connected device, it is recommended that you 
operate the device on house current. When 
operating the device on batteries, make sure the 
remaining battery power is sufficient. We do not 
guarantee against malfunctions, transfer failures, 
or destruction of audio data caused by shortages in 
battery power.
 Make sure that you do not disconnect the USB 
cable while transferring to a “WALKMAN” 
(ATRAC AD). If you do, the unit or the 
“WALKMAN” (ATRAC AD) may malfunction.
Transferring tracks to a USB storage 
device
Note
Make sure you do not disconnect the USB cable 
while transferring tracks to a USB storage device. 
If you do, the unit or the USB storage device may 
malfunction.
1 
Connect the USB storage device to a 
USB connecting jack on the unit.
Refer to the operating manual of the 
USB storage device as well.
2 
Enter the Function menu and select 
[HDD JUKEBOX].
Make sure the TRANSFER button is set 
to USB storage device (page 49).
3 
Select the albums, playlists, or tracks 
that you want to transfer.
4 
Press TRANSFER on the remote 
control or the unit.
5 
If the drive selection display appears, 
select the drive.
If the connected USB storage device 
has only one drive, the drive selection 
display does not appear.
6 
Make sure the selected tracks are 
checked 
.
Uncheck the tracks that you do not 
want to transfer.
7 
Select [Setting].
A display appears for setting the 
destination folder in the USB storage 
device.
8 
Select [Select folder at destination], 
and then select the destination folder 
from the pull-down menu.
Standard 
setting
Tracks are saved to “\\Music” 
folder.
Root 
setting
Tracks are saved to the root 
directory of the destination.
Select
Enter the folder name.
(
 Factory setting)
9 
Select [Close].
The unit returns to the USB storage 
transfer display.
10 
Select [Execute] or press TRANSFER.