Smeg A21X-5 Benutzerhandbuch
Instructions for the user
32
10.2.2
Burner caps, flame cap crowns and burners
To facilitate cleaning, caps, flame cap crowns, and burners are all
removable. To remove the flame separating crown of the fish hob,
loosen the two screws exposed after having removed the cap. Wash all
parts with warm water and non-abrasive detergent taking care to
remove all tough spots. Wait for all parts to be fully dry before
remounting.
Replace the flame-spreader crowns, checking that they are positioned
in their housing with their respective caps, taking care that flame-
spreader holes A correspond to the spark plugs and the thermocouples.
removable. To remove the flame separating crown of the fish hob,
loosen the two screws exposed after having removed the cap. Wash all
parts with warm water and non-abrasive detergent taking care to
remove all tough spots. Wait for all parts to be fully dry before
remounting.
Replace the flame-spreader crowns, checking that they are positioned
in their housing with their respective caps, taking care that flame-
spreader holes A correspond to the spark plugs and the thermocouples.
10.2.3
Ignition plugs and thermocouples
To work well, the ignition plugs and thermocouples must
always be very clean. Check them frequently and clean
them with a wet rag if necessary. Any dry residue should be
removed with a toothpick or a needle.
always be very clean. Check them frequently and clean
them with a wet rag if necessary. Any dry residue should be
removed with a toothpick or a needle.
10.3 Cleaning of the oven
For best oven upkeep clean regularly after having allowed to cool. Take
out all removable parts.
Detach the side guides by unscrewing ring nut
A and sliding out of the
rear hole
B.
•
DO NOT USE A STEAM JET FOR CLEANING THE INSIDE OF
THE OVEN.
THE OVEN.
•
Clean the oven grill and side guides with hot water and non-
abrasive detergent. Rinse and dry.
abrasive detergent. Rinse and dry.