Sony KDL-32NL140 Betriebsanweisung

Install the TV unit to the Table-Top Stand by 
aligning the end of the concave section of the 
TV unit to the metal neck of the Table-Top 
Stand.

~

• When you carry the TV unit, place your hands as 

illustrated on page 5 and hold it securely. Do not 
put stress on the LCD panel and the frame around 
the screen.

• Be careful to not pinch your fingers or the AC 

power cord when you install the TV unit to the 
Table-Top Stand.

Stabilize the TV unit and the Table-Top Stand 
with the supplied 4 screws.

~

• If you use an electric screwdriver, set the torque for 

tightening at approximately 1.5 N

·

m {15Kgf

·

cm}.

Sony strongly recommends taking 
measures to prevent the TV from toppling 
over; as unsecured TVs may topple and 
result in property damage, serious bodily 
injury or even death.

Prevent the TV from Toppling
s

Secure the TV to a wall and/or stand.

s

Do not allow children to play or climb on 
furniture and TV sets.

s

Avoid placing or hanging items on the TV.

s

Never install the TV on:

• slippery, unstable and/or uneven surfaces.
• furniture that can easily be used as steps, such 

as a chest of drawers.

s

Install the TV where it cannot be pulled, 
pushed, or knocked over.

s

Route all AC power cords and connecting 
cables so that they are not accessible to 
children.

Secure the stand for the TV.

If you use a Sony TV Stand (not supplied), make 
sure the TV stand can adequately support the 
weight of the TV. Use two angle braces (not 
supplied) to secure the stand.
For each angle brace use the appropriate hardware 
to:

• attach one side of the angle brace to the wall stud.
• attach the other side to the TV stand.

Stand

Angle brace