Sony KDL-32NL140 Betriebsanweisung
8
This TV can be installed on a wall by using a Wall-
Mount Bracket (sold separately). Before mounting
the TV on a wall, the Table-Top Stand must be
removed from the TV.
Mount Bracket (sold separately). Before mounting
the TV on a wall, the Table-Top Stand must be
removed from the TV.
~
• Do not remove the Table-Top Stand for any reason other
than to wall-mount the TV.
• For product protection and safety reasons, Sony
strongly recommends that you use the Wall-Mount
Bracket model designed for your TV and the wall-
mounting of your TV should be performed by a
Sony dealer or licensed contractor.
Bracket model designed for your TV and the wall-
mounting of your TV should be performed by a
Sony dealer or licensed contractor.
Use your TV with the following WALL-MOUNT
BRACKET.
BRACKET.
• For bracket installation, refer to the instructions on
page 9 and the instruction guide provided by the Wall-
Mount Bracket model for your TV. Sufficient expertise
is required in installing this TV, especially to determine
the strength of the wall for withstanding the TV’s
weight.
Mount Bracket model for your TV. Sufficient expertise
is required in installing this TV, especially to determine
the strength of the wall for withstanding the TV’s
weight.
• Be sure to store the removed screws and the Table-Top
Stand in a safe place until you are ready to reattach the
Table-Top Stand. Keep the screws away from
children.
Table-Top Stand. Keep the screws away from
children.
Follow the simple steps below to remove the Table-
Top Stand:
Top Stand:
1
Disconnect all the cables from the TV.
2
Gently lay the TV (face down) onto a level and
stable surface covered with a thick and soft
cloth. Make sure the Table-Top Stand is
hanging over the edge.
stable surface covered with a thick and soft
cloth. Make sure the Table-Top Stand is
hanging over the edge.
3
Remove the 4 screws from behind the TV as
indicated below. Do not remove any other
screws from the TV.
indicated below. Do not remove any other
screws from the TV.
4
Secure the Mounting Hooks to the rear of the
TV. For more details, refer to Installing the
Wall-Mount Bracket and also the Instruction
Guide provided by the Wall-Mount Bracket
model for your TV.
TV. For more details, refer to Installing the
Wall-Mount Bracket and also the Instruction
Guide provided by the Wall-Mount Bracket
model for your TV.
~
• If an electric screwdriver is used, set the torque to
tighten at approximately 1.5 N·m {15Kgf·cm}.
Preparation for Wall-Mounting
Sony TV Model No.
KDL-26NL140
KDL-32NL140
KDL-37NL140
KDL-37NL140
Sony Wall-Mount
Bracket Model No.
Bracket Model No.
SU-WL100
SU-WL500