Aten kh-0116 Benutzerhandbuch
KH0116 User Manual
30
F5 SKP:
Clicking the F5 field or pressing [F5] invokes Skip (SKP) Mode. This function
enables you to easily skip backward or forward - switching the console focus
from the currently active computer port to the previous or next available one.
enables you to easily skip backward or forward - switching the console focus
from the currently active computer port to the previous or next available one.
The selection of computers to be available for Skip Mode switching is
made with the Scan/Skip Mode setting under the F3 SET function (see
p. 24).
p. 24).
When you are in Skip Mode, press [
← ] to switch to the previous
computer in the List; press [
→ ] to switch to the next computer in the List;
press [
↑ ] to switch to the last computer on the previous station in the List;
press [
↓ ] to switch to the first computer on the next station in the List.
Note: When you Skip, you only Skip to the previous or next available
computer that is in the Scan/Skip Mode selection (see p. 25).
If a Port has been selected for Scan/Skip Mode, when the focus switches to
that port a Left/Right Triangle symbol appears before its Port ID Display
to indicate so.
to indicate so.
While Skip Mode is in effect, the console will not function normally. You
must exit Skip Mode in order to regain control of the console.
To exit Skip Mode, press [Spacebar] or [Esc].
kh0116-v2.book Page 30 Wednesday, March 22, 2006 4:53 PM