Aten kh-0116 Benutzerhandbuch

KH0116 User Manual

32

Clicking the F7 field or pressing [F7] invokes Auto Scan Mode. This function 
allows you to automatically switch among the available computers at regular 
intervals so that you can monitor their activity without having to take the 
trouble of switching manually.

Š The selection of computers to be included for Auto Scanning is made with 

the Scan/Skip Mode setting under the F3 SET function (see p. 24).

Š The amount of time that each Port displays for is set with the Scan 

Duration setting under the F3 SET function (see p. 24). When you want to 
stop at a particular location, press the [Spacebar] to stop scanning and exit 
Auto Scan Mode.

Š If the scanning stops on an empty port, or one where the computer is 

attached but is powered Off, the monitor screen will be blank, and the 
mouse and keyboard will have no effect. Simply wait - after the Scan 
Duration time is up, the Scan function will move on to the next port.

Š As each computer is accessed, an S appears in front of the Port ID display 

to indicate that it is being accessed under Auto Scan Mode.

Š While Auto Scan Mode is in effect, the console will not function normally. 

You must exit Auto Scan Mode in order to regain control of the console.

Š While you are in Auto Scan Mode, you can pause the scanning in order to 

keep the focus on a particular computer either by pressing P, or with a Left 
Click of the mouse. See Invoking Auto Scan, page 37, for details.

Š To exit Auto Scan Mode, press the [Spacebar] or [Esc].

kh0116-v2.book  Page 32  Wednesday, March 22, 2006  4:53 PM