Epson C88 Produktdatenblatt

Seite von 10
Epson Stylus C88
6/05
Epson Stylus C88
 - 
7
You see a window like this:
❏ Macintosh OS X: Double-click the 
Epson Printer Utility
 
icon in the Applications folder. Choose 
C88 Series
 and 
click 
OK
. Then click 
Epson Status Monitor
. You see a 
window like this:
Ink Cartridge Precautions
Warning: Keep ink cartridges out of the reach of children.
If ink gets on your hands, wash them thoroughly with soap and 
water. If ink gets in your eyes, flush them immediately with water.
Caution: Don’t remove the cartridge label, or ink will leak.
 
Don’t remove the green IC chip from the cartridge. Installing a 
cartridge without an IC chip can damage the printer. Avoid touching 
the green IC chip, as this can damage the ink cartridge.
If you remove an ink cartridge temporarily, protect the ink supply port 
on the bottom of the cartridge from dirt and dust. Place it in the 
original packaging, if you still have it, or in a small box.
Store ink cartridges in the same environment as the printer. Stand the 
cartridges upright (the label identifying the color should be on the 
top). 
Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once 
you start the ink cartridge replacement procedure, you must 
complete all the steps in one session.
1. Make sure the printer is turned on and not printing. The 
power light should be on, but not flashing.
2. Open the printer cover.
3. Press and release the   ink button. 
The ink cartridge holder moves to the left, and the cartridge 
that needs to be replaced stops under the 
 ink out mark. 
The 
power light flashes. 
Caution: To avoid damaging the printer, never move the print 
head by hand.
Note: Don’t hold down the
 
 ink button for more than 
3 seconds, or the printer will start to clean the print head.
If no cartridge needs to be replaced, the holder moves to the 
ink cartridge replacement position, shown below. Go to 
step 5.
4. Press the   ink button again.
❏ If more than one cartridge is empty, the next cartridge 
moves under the 
ink out mark.
❏ If all the empty cartridges have been identified, the print 
head moves right to the ink cartridge replacement 
position, shown below.