Epson RX600 Produktdatenblatt

Epson Stylus Photo RX600

2/04

Epson Stylus Photo RX600

 - 17

5. On the test page, select the pattern in each row with the two 

vertical lines most precisely printed on top of each other. 
You may need to use a magnifying glass or loupe.

.

Select the number of the best pattern for each row by 
pressing the l and r buttons. Then press 

OK

.

6. The next pattern number appears. Repeat step 6 for each of 

the remaining alignment patterns.

7. When you’re finished you see the message 

Head alignment 

completed

 on the LCD screen. Press 

OK

 to return to the 

Setup Menu. 

If you move your RX600 some distance, you need to prepare 
it for transportation in its original box or one of a similar size. 

Caution: 
To avoid damage, always leave the ink cartridges installed when 
transporting the RX600. Never transport or store the RX600 on its 
side or in a tilted or upside-down position.

1. Press the P

On

 button to turn on the RX600. Wait until 

the scanner carriage moves to the home position (toward 
the left side) and the print head locks in the far right 
position. Then turn the RX600 off.

2. Open the scanner lid and slide the transportation lock to 

the locked 

position. 

Caution: 
Be sure to move the transportation lock back to the unlocked 
position after installing the RX600 in its new location.

3. Close the scanner lid.

4. Unplug the power cord from the electrical outlet. Then 

disconnect the USB cable from your computer.

5. Unplug the cord from the 

TPU

 connector.

6. Remove any paper from the sheet feeder and output tray, 

then remove the paper support.

7. Close the output tray.

8. Lift up the scanner unit.

9. Remove the orange print head lock from its storage area and 

install it as shown to prevent the print head from moving 
during transport. If you can’t find the orange print head 
lock, tape the print head to the case. 

Caution: 
Be sure to remove the orange print head lock or tape after 
installing the RX600 in its new location.