Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren

a. Select Switching > VLAN > Advanced > Port PVID Configuration. A screen similar 

to the following displays.

b.  Under PVID Configuration, scroll down and select the check box for Interface 1/0/1. 

Then scroll down and select the Interface 1/0/2 check box.

c.  Enter the following information:

In the Acceptable Frame Type polyhedron list, select VLAN Only.

In the PVID (1 to 4093) field, enter 2.

d.  Click Apply to save the settings.

Create Three VLANs

The example is shown as CLI commands and as a Web interface procedure.

CLI: Create Three VLANS

Use the following commands to create three VLANs and to assign the VLAN IDs while 
leaving the names blank.

Web Interface: Create Three VLANS

Create VLAN100.

(Netgear Switch) #vlan database

(Netgear Switch) (Vlan)#vlan 100

(Netgear Switch) (Vlan)#vlan 101

(Netgear Switch) (Vlan)#vlan 102

(Netgear Switch) (Vlan)#exit