Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Utility Commands
305
M5300, M6100, and M7100 Series ProSAFE Managed Switches
telnetd
Use this command in Support mode to start or stop the Telnet daemon on the switch.
Cable Test Command
The cable test feature enables you to determine the cable connection status on a selected
port.
port.
Note:
The cable test feature is supported only for copper cable. It is not
supported for optical fiber cable.
supported for optical fiber cable.
If the port has an active link while the cable test is run, the link can go down for the duration
of the test.
of the test.
Format
telnetd {start | stop}
Mode
Support