Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Switching Commands
430
M5300, M6100, and M7100 Series ProSAFE Managed Switches
no set garp timer leaveall
This command sets how frequently Leave All PDUs are generated the default and only has
an effect when GVRP is enabled.
an effect when GVRP is enabled.
show garp
This command displays GARP information.
GVRP Commands
This section describes the commands you use to configure and view GARP VLAN
Registration Protocol (GVRP) information. GVRP-enabled switches exchange VLAN
configuration information, which allows GVRP to provide dynamic VLAN creation on trunk
ports and automatic VLAN pruning.
Registration Protocol (GVRP) information. GVRP-enabled switches exchange VLAN
configuration information, which allows GVRP to provide dynamic VLAN creation on trunk
ports and automatic VLAN pruning.
Note:
If GVRP is disabled, the system does not forward GVRP messages.
set gvrp adminmode
This command enables GVRP on the system.
Format
no set garp timer leaveall
Mode
Interface Config
Global Config
Format
show garp
Mode
Privileged EXEC
User EXEC
Term
Definition
GMRP Admin
Mode
Mode
The administrative mode of GARP Multicast Registration Protocol (GMRP) for the system.
GVRP Admin Mode The administrative mode of GARP VLAN Registration Protocol (GVRP) for the system.
Default
disabled
Format
set gvrp adminmode
Mode
Privileged EXEC