Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
Port Routing
109
Managed Switches
Web Interface: Add a Default Route
1.
Select Routing > Routing Table > Basic > Route Configuration.
A screen similar to the following displays.
2.
In the Route Type list, select DefaultRoute.
3.
In the Next Hop IP Address field, enter one of the routing interface’s IP addresses.
•
The Network Address and Subnet Mask fields will not accept input as they are not
needed.
needed.
•
The Preference field is optional. A value of 1 (highest) will be assigned by default if
not specified.
not specified.
4.
Click the Add button on the bottom of the screen.
This creates the default route entry in the routing table.
Add a Static Route
When the switch performs IP routing, it forwards the packet to the default route for a
destination that is not in the same subnet as the source address. However, you can set a
path (static route) that is different than the default route if you prefer. The following procedure
shows how to add a static route to the switch routing table.
destination that is not in the same subnet as the source address. However, you can set a
path (static route) that is different than the default route if you prefer. The following procedure
shows how to add a static route to the switch routing table.