Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
Port Routing
110
Managed Switches
CLI: Add a Static Route
The following commands assume that the switch already has a defined a routing interface
with a network address of 10.10.10.0, and is configured so that all packets destined for
network 10.10.100.0 take the path of routing port.
with a network address of 10.10.10.0, and is configured so that all packets destined for
network 10.10.100.0 take the path of routing port.
(FSM7328S) #show ip route
Total Number of Routes............................1
Network
Subnet
Next Hop
Next Hop
Address
Mask
Protocol
Intf
IP Address
----------
-------------
--------
----------
-----------
10.10.10.0
255.255.255.0
Local
1/0/3
10.10.10.1
To delete the static route, simply add the no keyword in the front of the ip route command.
Web Interface: Add a Static Route
1.
Select Routing > Routing Table > Basic > Route Configuration.
A screen similar to the following displays.
2.
In the Route Type list, select Static.
3.
Fill in the Network Address field.
Note that this field should have a network IP address, not a host IP address. Do not enter
something like 10,100.100.1. The last number should always be 0 (zero).
something like 10,100.100.1. The last number should always be 0 (zero).
4.
In the Subnet Mask field, enter a value that matches the subnet range that you want to use.
5.
The Preference field is optional. A value of 1 is entered by default if you do not enter a
number.
number.
6.
Click the Add button on the bottom of the screen. The screen is updated with the static route
shown in the routing table.
shown in the routing table.