Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
CoS Queuing
275
Managed Switches
Web Interface: Set classofservice Trust Mode
1.
Select QoS > CoS > Basic > CoS Configuration.
A screen similar to the following displays.
2.
Select the Global radio button.
3.
In the Global Trust Mode list, select trust dot1p.
4.
Click Apply to save the settings.
Configure Cos-queue Min-bandwidth and Strict Priority
Scheduler Mode
Scheduler Mode
The example is shown as CLI commands and as a web interface procedure.
CLI: Configure Cos-queue Min-bandwidth and Strict Priority
Scheduler Mode
Scheduler Mode
(Netgear Switch) (Config)#cos-queue min-bandwidth?
<bw-0> Enter the minimum bandwidth percentage for Queue 0.
(Netgear Switch) (Config)#cos-queue min-bandwidth 15
Incorrect input! Use 'cos-queue min-bandwidth <bw-0>..<bw-7>.
(Netgear Switch) (Config)#cos-queue min-bandwidth 15 25 10 5 5 20 10 10
(Netgear Switch) (Config)#cos-queue strict?
<queue-id> Enter a Queue Id from 0 to 7.
(Netgear Switch) (Config)#cos-queue strict 1?
<cr> Press Enter to execute the command.
<queue-id> Enter an additional Queue Id from 0 to 7.
(Netgear Switch) (Config)#cos-queue strict 1
Web Interface: Configure CoS-queue Min-bandwidth and
Strict Priority Scheduler Mode
Strict Priority Scheduler Mode
1.
For Interface 1/0/2, set the minimum bandwidth to 15 for queue 0.
a. Select QoS > CoS > Advanced > Interface Queue Configuration.