Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren

Now 1/0/2 appears in the Interface field at the top.

d.  Enter the following information:

In the Minimum Bandwidth field, enter 25.

In the Scheduler Type list, select Strict.

e.  Click Apply to save the settings.

The example is shown as CLI commands and as a web interface procedure.

(Netgear Switch) (Interface 1/0/3)#classofservice trust?

dot1p                    Sets the Class of Service Trust Mode of an Interface

                         to 802.1p.

ip-dscp                  Sets the Class of Service Trust Mode of an Interface

                         to IP DSCP.

(Netgear Switch) (Interface 1/0/3)#classofservice trust dot1p?

<cr>                     Press Enter to execute the command.

(Netgear Switch) (Interface 1/0/3)#classofservice trust dot1p

The traffic class value range is 0–-6 instead of 0–-7 because queue 7 
is reserved in a stacking build for stack control, and therefore you 
cannot configure it.

Select QoS > CoS > Advanced > CoS Configuration. 

A screen similar to the following displays.

Under CoS Configuration, select the Interface radio button.

In the Interface list, select 1/0/3.

In the Interface Trust Mode list, select trust dot1p.

Click Apply to save the settings.