Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Chassis and Stacking
182
M6100, M5300, and M7100 Series Managed Switches
Stack Configuration
You can move the primary management unit functionality from one unit to another. Upon
execution, the entire stack (including all interfaces in the stack) is unconfigured and
reconfigured with the configuration on the new primary management unit. After the reload is
complete, all stack management capability must be performed on the new primary
management unit. To preserve the current configuration across a stack move, save the
current configuration to the NVRAM before performing the stack move. A stack move causes
all routes and Layer 2 addresses to be lost. The administrator is prompted to confirm the
management move.
execution, the entire stack (including all interfaces in the stack) is unconfigured and
reconfigured with the configuration on the new primary management unit. After the reload is
complete, all stack management capability must be performed on the new primary
management unit. To preserve the current configuration across a stack move, save the
current configuration to the NVRAM before performing the stack move. A stack move causes
all routes and Layer 2 addresses to be lost. The administrator is prompted to confirm the
management move.
Select a New Stack Master
To select a new stack master:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select System > Stacking > Basic > Stack Configuration.