Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

The Management Unit Selected menu displays the current primary management unit.

To change the primary management unit, select another unit ID of the stack member to 

become the stack master. 

A message displays to notify you that moving stack management unconfigures the entire 

stack including all interfaces.

Click the OK button to confirm the selection and reload the stack. 

The stack is unavailable until the boot process completes. 

Use the Stack Sample mode section of the screen to configure global status management 
mode, and sample size. The mode and sample size parameters are applied globally to all 
units in the stack.

In the Sample mode list, select one of the following:

. Tracks the sum of received time-stamp offsets cumulatively.

. Tracks the history of received timestamps.

In the Max Samples field, configure the maximum number of samples to keep. The valid 
range is 100 to 500.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.