Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
214
M6100, M5300, and M7100 Series Managed Switches
Configure GARP Switch Settings
Note:
It can take up to 10 seconds for GARP configuration changes to take
effect.
effect.
To configure GARP switch settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching
> VLAN > Advanced > GARP Switch Configuration.
8.
Select the GVRP Mode Disable or Enable radio button.
This selects the GARP VLAN registration protocol administrative mode for the switch.
The factory default is Disable.
The factory default is Disable.
9.
Select the GMRP Mode Disable or Enable radio button.
This selects the GARP multicast registration protocol administrative mode for the switch.
The factory default is Disable.
The factory default is Disable.