Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
215
M6100, M5300, and M7100 Series Managed Switches
Configure GARP Port
Note:
It can take up to 10 seconds for GARP configuration changes to take
effect.
effect.
To configure GARP port:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching
> VLAN > Advanced > GARP Port Configuration.
8.
Use Interface to select the physical interface for which data is to be displayed or configured.
9.
In the Port GVRP Mode field, select Enable or Disable.
This specifies the GARP VLAN registration protocol administrative mode for the port.If
you select Disable, the protocol is not active and the join time, leave time, and leave all
time have no effect. The factory default is Disable.
you select Disable, the protocol is not active and the join time, leave time, and leave all
time have no effect. The factory default is Disable.
10.
In the Port GMRP Mode field, select Enable or Disable