Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
269
M6100, M5300, and M7100 Series Managed Switches
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching
> Multicast > MLD Snooping > Multicast Router VLAN Configuration.
8.
Use Interface to select the interface.
9.
Use VLAN ID to select the VLAN ID.
10.
Use Multicast Router to enable or disable the multicast router for the VLAN ID.
11.
Click the Apply button.
The updated configuration is sent to the switch.
Configure MLD Snooping Querier
You can configure the parameters for an MLD snooping querier. Only a user with read/write
access privileges can change the data on this screen.
access privileges can change the data on this screen.
To configure an MLD snooping querier:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.