Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
271
M6100, M5300, and M7100 Series Managed Switches
Configure MLD Snooping Querier VLAN Settings
To configure MLD snooping querier VLAN settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching
> Multicast > MLD Snooping > Querier VLAN Configuration.
8.
Use VLAN ID to select the VLAN ID on which the MLD snooping querier is administratively
enabled and a VLAN exists in the VLAN database.
9.
Use Querier Election Participate Mode to enable or disable the MLD snooping querier
participation in election mode.
When this mode is disabled, on detecting another querier of same version in the VLAN,
the snooping querier moves to a non-querier state. When this mode is enabled, the
snooping querier participates in querier election where the lowest IP address wins the
querier election and operates as the querier in that VLAN. The other querier moves to
non-querier state.
the snooping querier moves to a non-querier state. When this mode is enabled, the
snooping querier participates in querier election where the lowest IP address wins the
querier election and operates as the querier in that VLAN. The other querier moves to
non-querier state.
10.
Use Querier VLAN Address to specify the snooping querier address to be used as the
source address in periodic MLD queries sent on the specified VLAN.