Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

The following table describes the nonconfigurable information displayed on the screen.

You can configure basic, advanced, group, interface or group membership settings.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

Operational State

The operational state of the MLD snooping querier on a VLAN. It can be in 
any of the following states:

: Snooping switch is the querier in the VLAN. The snooping 

switch sends out periodic queries with a time interval equal to the 
configured querier query interval. If the snooping switch sees a better 
querier in the VLAN, it moves to non-querier mode.

: Snooping switch is in non-querier mode in the VLAN. If 

the querier expiry interval timer is expired, the snooping switch moves 
into querier mode.

: Snooping querier is not operational on the VLAN. The 

snooping querier moves to disabled mode when MLD snooping is not 
operational on the VLAN or when the querier address is not configured 
or the network management address is also not configured.

Operational Version

The operational MLD protocol version of the querier.

Last Querier Address

The IP address of the last querier from which a query was snooped on the 
VLAN.

Last Querier Version

The MLD protocol version of the last querier from which a query was 
snooped on the VLAN.

Operational Max Response Time

Displays maximum response time to be used in the queries that are sent by 
the snooping querier.