Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure System Information
28
M6100, M5300, and M7100 Series Managed Switches
The factory default value is 169.254.101.100.
11.
Specify the Subnet Mask for the service port.
This is also referred to as the subnet/network mask and defines the portion of the
interface’s IP address that is used to identify the attached network. The factory default
value is 255.255.255.0.
interface’s IP address that is used to identify the attached network. The factory default
value is 255.255.255.0.
12.
Specify the default Gateway for the service port.
The default value is 0.0.0.0.
13.
In the IPv6 Address Assignment field, select the method for getting IPv6 network
parameters (IPv6 prefix and prefix length) for the configured service port.
Possible options are DHCPv6, Auto Config, or Static. The default value is Auto Config.
14.
Specify the IPv6 Prefix and Prefix Length for the service port.
When Auto Config is selected, the appropriate IPv6 prefix and prefix length are displayed
in this field.
in this field.
15.
Specify the default IPv6 Gateway for the service port.
16.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
View or Define System Information
When you log in, the System Information screen displays. You can configure and view
general device information.
general device information.
To view or define system information:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.