Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
286
M6100, M5300, and M7100 Series Managed Switches
The following table describes the nonconfigurable data that is displayed.
Configure Port Descriptions
To configure and display the description for all ports in the device:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching > Ports > Port Description.
Table 107. Port Configuration
Field
Description
Media Type
The media type.
Port Type
For normal ports this field is Normal. Otherwise the possible values are
as follows:
as follows:
•
Mirrored
. The port is a mirrored port on which all the traffic is
copied to the probe port.
•
Probe
. Use this port to monitor a mirrored port.
•
Trunk Member
. The port is a member of a link aggregation trunk.
Look at the LAG screens for more information.
Admin Status
When the port’s admin mode is D-Disable, this field indicates the
reason. Possible reasons are as follows:
reason. Possible reasons are as follows:
•
STP
. Spanning Tree Protocol violation.
•
UDLD
. UDLD protocol violation.
•
XCEIVER
. Unsupported SFP/SFP+ inserted.
Physical Status
Indicates the port speed and duplex mode.
Link Status
Indicates whether the link is up or down.
ifIndex
The ifIndex of the interface table entry associated with this port.