Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Switching Information
288
M6100, M5300, and M7100 Series Managed Switches
The web management interface menu displays.
7.
Select Switching > Ports > Port Transceiver.
8.
Select Unit ID to display physical ports of the selected unit or select All to display physical
ports of all units.
To refresh the screen with the latest information on the switch, click the Update button.
The following describes the nonconfigurable data that is displayed.
Link Aggregation Groups
Link aggregation groups (LAGs), which are also known as port-channels, allow you to
combine multiple full-duplex Ethernet links into a single logical link. Network devices treat the
aggregation as if it were a single link, which increases fault tolerance and provides load
sharing. You assign the LAG VLAN membership after you create a LAG. The LAG by default
becomes a member of the management VLAN.
combine multiple full-duplex Ethernet links into a single logical link. Network devices treat the
aggregation as if it were a single link, which increases fault tolerance and provides load
sharing. You assign the LAG VLAN membership after you create a LAG. The LAG by default
becomes a member of the management VLAN.
A LAG interface can be either static or dynamic, but not both. All members of a LAG must
participate in the same protocols. A static port-channel interface does not require a partner
system to be able to aggregate its member ports.
system to be able to aggregate its member ports.
Table 109. Port Transceiver
Field
Description
Port
The interface for which data is to be displayed.
Vendor Name
Vendor name of the SFP.
Link Length 50 μm
Link length supported for 50 μm fiber.
Link Length 62, 5 μm
Link length supported for 62, 5 μm fiber.
Serial Number
Serial number of the SFP.
Part Number
Part number of the SFP.
Nominal Bit Rate
Nominal signalling rate for SFP.
Revision
Vendor revision of the SFP.
Compliance
Compliance of the SFP.