Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Routing
353
M6100, M5300, and M7100 Series Managed Switches
IPv6 Static Route Configuration
Configure the IPv6 static route:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
Neighbor State
The state of the neighbor cache entry. Following are the states for
dynamic entries in the IPv6 neighbor discovery cache:
dynamic entries in the IPv6 neighbor discovery cache:
•
Incmp
. Address resolution is being performed on the entry.A neighbor
solicitation message was sent to the solicited-node multicast address
of the target, but the corresponding neighbor advertisement message
has not yet been received.
of the target, but the corresponding neighbor advertisement message
has not yet been received.
•
Reach
. Positive confirmation was received within the last Reachable
Time milliseconds that the forward path to the neighbor was
functioning properly. While in REACH state, the device takes no
special action as packets are sent.
functioning properly. While in REACH state, the device takes no
special action as packets are sent.
•
Stale
. More than ReachableTime milliseconds elapsed since the last
positive confirmation was received that the forward path was
functioning properly. While in STALE state, the device takes no action
until a packet is sent.
functioning properly. While in STALE state, the device takes no action
until a packet is sent.
•
Delay
. More than ReachableTime milliseconds elapsed since the last
positive confirmation was received that the forward path was
functioning properly. A packet was sent within the last
DELAY_FIRST_PROBE_TIME seconds. If no reachability
confirmation is received within DELAY_FIRST_PROBE_TIME
seconds of entering the DELAY state, send a neighbor solicitation
message and change the state to PROBE.
functioning properly. A packet was sent within the last
DELAY_FIRST_PROBE_TIME seconds. If no reachability
confirmation is received within DELAY_FIRST_PROBE_TIME
seconds of entering the DELAY state, send a neighbor solicitation
message and change the state to PROBE.
•
Probe
. A reachability confirmation is actively sought by resending
neighbor solicitation messages every RetransTimer milliseconds until
a reachability confirmation is received.
a reachability confirmation is received.
Last Updated
Time since the address was confirmed to be reachable.
Table 133. IPv6 Advanced Neighbor Table (continued)
Field
Description