Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Routing
354
M6100, M5300, and M7100 Series Managed Switches
7.
Select Routing
> IPv6 > Advanced > Static Route Configuration.
8.
In the IPv6 Prefix field, specify the IPv6 prefix for the configured route.
9.
In the Prefix Length field, specify the IPv6 prefix length for the configured route.
10.
In the Next Hop IPv6 Address Type list, select one of the following options:
•
Global IPv6 Address
.
•
Link-Local
IPv6 address. If the next hop IPv6 address specified is a link-local IPv6
address, then specify the interface for the link-local IPv6 next hop address.
•
Static-Reject
. Select Static-Reject to create a static-reject route for a destination
prefix. No next hop address is specified in that case.
11.
Enter the Next Hop IPv6 Address for the configured route.
12.
Select from the Interface list to specify in unit/slot/port format, the link-local IPv6 next hop
address.
This field is enabled only if Link-Local is selected.
13.
Specify the route Preference of the configured route.
14.
Click the Add button.
The route is added.
15.
To delete the selected route, click the Delete button.
Configure the IPv6 Route Table
To configure the IPv6 Route Table:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.