Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

You can change the configuration parameters for the Address Resolution Protocol (ARP) 
table. You can also use this screen to display the contents of the table.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Routing

> ARP > Advanced > ARP Table Configuration.

Port

The associated unit/slot/port of the connection.

MAC Address

The unicast MAC address of the device. The address is six two-digit 
hexadecimal numbers separated by colons, for example 
00:06:29:32:81:40.

Type

The type of ARP entry. Possible values are as follows:

. An ARP entry associated with one of the switch’s routing 

interface’s MAC addresses.

. A dynamic ARP entry whose IP address is that of a 

router.

. An ARP entry configured by the user.

. An ARP entry that was learned by the router.

Age

Age since the entry was last refreshed in the ARP table (in seconds).