Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Routing
367
M6100, M5300, and M7100 Series Managed Switches
•
Specific Dynamic/Gateway Entry
. Selecting this allows the user to specify the
required IP address.
•
Specific Static Entry
. Selecting this allows the user to specify the required IP
address.
•
None
. Selected if the user does not want to delete any entry from the ARP Table.
The following table describes the nonconfigurable information displayed on the screen.
Configure RIP
Only the following switches support RIP:
•
M6100
•
M5300-28G3
•
M5300-52G3
•
M5300-28GF3
The following switches support RIP with an L3 license:
•
M5300-28G
•
M5300-52G
•
M5300-28G-POE+
•
M5300-52G-POE+
Enable RIP
To enable RIP:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
Table 137. ARP Table Configuration
Field
Description
Total Entry Count
Total number of entries in the ARP table.
Peak Total Entries
Highest value reached by Total Entry Count. This counter value is
restarted whenever the ARP table Cache Size value is changed.
restarted whenever the ARP table Cache Size value is changed.
Active Static Entries
Total number of active static entries in the ARP table.
Configured Static Entries
Total number of configured static entries in the ARP table.
Maximum Static Entries
Maximum number of static entries that can be defined.