Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Multicast Routing
456
M6100, M5300, and M7100 Series Managed Switches
Configure the Multicast Interface
To configure the multicast interface:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing > Multicast > Interface Configuration.
8.
In the Go To Interface field, enter the interface in unit/slot/port format and click the Go
button.
The entry corresponding to the specified interface is selected.
9.
Select the check box next to the routing interface.
10.
Enter the TTL Threshold below which a multicast data packet is not forwarded from the
selected interface.
Enter a number between 0 and 255. The default is 1. If you enter 0, all multicast packets
for the selected interface are forwarded. You must configure at least one router interface
before you see this field.
for the selected interface are forwarded. You must configure at least one router interface
before you see this field.
11.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.