Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Multicast Routing
458
M6100, M5300, and M7100 Series Managed Switches
Configure the DVMRP Interface
To configure the multicast DVMRP interface:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing
> Multicast > DVMRP > Interface Configuration.
8.
In the Go To Interface field, enter the interface in unit/slot/port format and click the Go
button.
The entry corresponding to the specified interface is selected.
9.
Select the check box next to the Interface for which data is to be displayed or configured.
10.
In the Interface Mode field, select the Enable or Disable option to set the administrative
mode of the selected DVMRP routing interface.
The default is Disable.
11.
In the Interface Metric field, enter the DVMRP metric for the selected interface.
This value is sent in DVMRP messages as the cost to reach this network. Valid values are
1 to 31. The default value is 1.
1 to 31. The default value is 1.
12.
Click the Apply button.