Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Multicast Routing
463
M6100, M5300, and M7100 Series Managed Switches
The following table describes the nonconfigurable data that is displayed.
View the DVMRP Route
To view the multicast DVMRP route:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing
> Multicast > DVMRP > DVMRP Route.
To refresh the screen with the latest information on the switch, click the Update button.
Table 174. DVMRP Prune
Field
Description
Group IP
The group address that was pruned.
Source IP
The IP address used with the source mask to identify the source
network for this table entry.
network for this table entry.
Source Mask
The network mask used with the source IP address.
Expiry Time
The amount of time remaining before this prune will expire at the
upstream neighbor. If no prune messages were received from
downstream neighbors, this is set to the value of the default prune
lifetime timer; otherwise, it is set to the smallest received value or the
default timer, whichever is less.
upstream neighbor. If no prune messages were received from
downstream neighbors, this is set to the value of the default prune
lifetime timer; otherwise, it is set to the smallest received value or the
default timer, whichever is less.