Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Multicast Routing
464
M6100, M5300, and M7100 Series Managed Switches
The following table describes the nonconfigurable data that is displayed.
Configure Multicast IGMP Settings
You can configure IGMP settings and view IGMP statistics.
Configure IGMP Global Settings
To configure the IGMP global settings:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
Table 175. DVMRP Route
Field
Description
Source Address
The network address that is combined with the source mask to identify
the sources for this entry.
the sources for this entry.
Source Mask
The network subnet mask used with the source IP address to identify
the sources for this entry.
the sources for this entry.
Upstream Neighbor
The address of the upstream neighbor (for example, RPF neighbor)
from which IP datagrams from these sources are received.
from which IP datagrams from these sources are received.
Interface
The interface on which IP datagrams sent by these sources are
received. A value of 0 typically means the route is an aggregate for
which no next-hop interface exists.
received. A value of 0 typically means the route is an aggregate for
which no next-hop interface exists.
Metric
The distance in hops to the source subnet.
Expiry Time
The amount of time remaining before this prune expires at the
upstream neighbor. If no prune messages were received from
downstream neighbors, this is set to value of the default prune lifetime
timer, otherwise it is set to the smallest received value or the default
timer, whichever is less.
upstream neighbor. If no prune messages were received from
downstream neighbors, this is set to value of the default prune lifetime
timer, otherwise it is set to the smallest received value or the default
timer, whichever is less.
Up Time
The time since the route represented by this entry was learned by the
router.
router.