Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Multicast Routing
483
M6100, M5300, and M7100 Series Managed Switches
8.
From the list of interfaces, select the Interface.
9.
Enter the Group Address transmitted in candidate-RP-advertisements.
If you enter an IPv6 address, the format is prefix/prefix length.
10.
In the Group Mask field, enter the group address mask transmitted in
candidate-RP-advertisements
11.
In the C-RP Advertisement Interval field, specify the duration in seconds at which the
C-RP messages are unicast to the bootstrap router (BSR).
The range is from 1 to 16383 seconds. The default value is 60 seconds. If this field is
submitted without any value, the default value is used.
submitted without any value, the default value is used.
12.
Click the Add button.
The candidate-RP address is added for the PIM router.
13.
To delete the selected candidate-RP address for the PIM router, click the Delete button.
Configure the PIM Bootstrap Router Candidate
To configure the multicast PIM bootstrap router (BSR) candidate:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing
> Multicast > PIM > BSR Candidate Configuration.