Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Multicast Routing
485
M6100, M5300, and M7100 Series Managed Switches
Configure the PIM Static Rendezvous Point
You can statically configure the rendezvous point (RP) address for one or more multicast
groups.
groups.
To configure the PIM static RP:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing
> Multicast > PIM > Static RP Configuration.
8.
In the RP Address field, enter the IP address for one or more multicast groups.
9.
In the Group Address field, enter the group address of the RP.
10.
Enter the Group Mask of the RP to be created or deleted.
11.
In the Override field, select Enable or Disable.
Enable
indicates that, if there is a conflict, the RP configured with this option prevails
over the RP learned by BSR.
12.
Click the Add button.
The static RP address is added for one or more multicast groups
13.
To remove the selected RP address, click the Delete button.
14.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.