Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Quality of Service
521
M6100, M5300, and M7100 Series Managed Switches
•
VOIP
. Sets the match criteria to UDP protocol.
•
HTTP
. Sets the match criteria to HTTP destination port.
•
FTP
. Sets match criteria to FTP destination port.
•
Telnet
. Sets the match criteria to Telnet destination port.
•
Every
. Sets the match criteria for all traffic.
•
Create a Diffserv Policy and add it to the DiffServ Class created.
•
If Policing is set to YES, then DiffServ Policy style is set to Simple. Traffic which
conforms to the Class Match criteria is processed according to the Outbound Priority
selection. Outbound Priority configures the handling of conforming traffic as below:
conforms to the Class Match criteria is processed according to the Outbound Priority
selection. Outbound Priority configures the handling of conforming traffic as below:
•
High
. Sets the policing action to markdscp ef.
•
Med
. Sets the policing action to markdscp af31.
•
Low
. Sets the policing action to send.
•
If Policing is set to NO, then all traffic is marked as follows:
•
High
. Sets the policy mark to ipdscp ef.
•
Med
. Sets the policy mark to ipdscp af31.
•
Low
. Sets the policy mark ito pdscp be.
•
Each port selected is added to the policy created.
Use the DiffServ Wizard
To use the DiffServ Wizard:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select QoS
> DiffServ > DiffServ Wizard.