Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

Use Traffic Type to define the DiffServ Class. 

Traffic type options are: VOIP, HTTP, FTP, Telnet, and Every.

Ports displays the ports which can be configured to support a DiffServ policy. 

The DiffServ policy is added to selected ports.

Use Enable Policing to add policing to the DiffServ policy. 

The policing rate to be applied.

Specify the Committed Rate: 

When Policing is enabled, the committed rate is applied to the policy and the policing 
action is set to conform. 

When Policing is disabled, the committed rate is not applied and the policy is set to 
markdscp.

Specify the Outbound Priority: 

When Policing is enabled, Outbound Priority defines the type of policing conform 
action where: High sets action to markdscp ef, Med sets the action to markdscp af31, 
and Low sets the action to send. 

When Policing is disabled, Outbound Priority defines the policy where: High sets the 
policy to mark ipdscp ef, Med sets policy to mark ipdscp af31, and Low sets the policy 
to mark ipdscp be.

Packets are filtered and processed based on defined criteria. The filtering criteria is defined 
by a class. The processing is defined by a policy's attributes. Policy attributes can be defined 
on a per–class instance basis, and it is these attributes that are applied when a match occurs.

The configuration process begins with defining one or more match criteria for a class. Then 
one or more classes are added to a policy. Policies are then added to interfaces.