Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure System Information
53
M6100, M5300, and M7100 Series Managed Switches
The factory default value is 169.254.100.100.
12.
Specify the IP Subnet Mask for the interface.
The factory default value is 255.255.0.0.
13.
Specify the Management VLAN ID of the switch.
The management VLAN is used for management of the switch. It can be configured to
any value in the range of 1–4093.
any value in the range of 1–4093.
14.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable fields on the IPv4 Management VLAN
Configuration screen.
Configuration screen.
Configure an IPv6 Management VLAN
To configure an IPv6 management VLAN:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select System > Management > Management Interfaces > IPv6 Management VLAN
Configuration
Configuration
.
Table 17. IPv4 Management VLAN Configuration
Field
Description
MAC Address
The MAC address assigned to the VLAN routing interface.
Routing Interface Status
Indicates whether the link status is up or down.