Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

Select the Admin mode Disable or Enable radio button.

This enables or disables the administration mode for the management VLAN IPv6 
interface on the switch.

Select the IPv6 Enable mode Enable or Disable radio button.

This specifies the IPv6 mode on the management VLAN.

Select the Address Autoconfigure mode Enable or Disable radio button.

The Address Autoconfigure mode option is available only if unicast 
routing is globally disabled.

Select the Address DHCP mode Enable or Disable radio button.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

The VLAN IP Interface Status field indicates whether the link is up or down.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.