Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

 - These packets are marked by DiffServ with the specified CoS value 

before being presented to the system forwarding element. This selection requires 
that the Mark CoS field be set.

 - These packets are presented unmodified by DiffServ to the system 

forwarding element.

 - These packets are marked by DiffServ with the specified IP 

Precedence value before being presented to the system forwarding element. This 
selection requires that the Mark IP Precedence field be set.

If you select Two Rate, you can configure additional fields (same fields as for a simple 

policy).

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

The following table describes the nonconfigurable information displayed on the screen.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Policy Name

Displays name of the DiffServ policy.

Policy Type

Displays type of the policy as In.

Member Class Name

Displays name of each class instance within the 
policy.