Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Configure Quality of Service
537
M6100, M5300, and M7100 Series Managed Switches
7.
Select QoS > DiffServ > Advanced > Service Interface Configuration.
8.
Use Interface to select the interface for the DiffServ service.
9.
Policy Name
- Lists all the policy names from which one can be selected.
This field is not shown for read/write users where the inbound service policy attachment
is not supported by the platform.
is not supported by the platform.
View DiffServ Service Statistics
This screen displays class-oriented statistical information for the policy, which is specified by
the interface and direction. The Member Class list is populated on the basis of the specified
interface and direction and hence the attached policy (if any). Highlighting a member class
name displays the statistical information for the policy-class instance for the specified
interface and direction.
the interface and direction. The Member Class list is populated on the basis of the specified
interface and direction and hence the attached policy (if any). Highlighting a member class
name displays the statistical information for the policy-class instance for the specified
interface and direction.
To view the DiffServ service statistics:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
Table 204. Service Interface Configuration
Field
Description
Direction
Shows that the traffic direction of this service interface is In.
Operational Status
Shows the operational status of this service interface, either Up or
Down.
Down.