Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
603
M6100, M5300, and M7100 Series Managed Switches
The group mode can be either isolated or community. When in isolated mode, the
member port in the group cannot forward its egress traffic to any other members in the
same group. By default, the mode is community mode that each member port can
forward traffic to other members in the same group, but not to members in other groups.
member port in the group cannot forward its egress traffic to any other members in the
same group. By default, the mode is community mode that each member port can
forward traffic to other members in the same group, but not to members in other groups.
11.
Click the Add button.
The private group is created in the switch.
12.
To delete a selected private group from the switch, click the Delete button.
Configure Private Group Membership
To configure private group membership:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Security > Traffic Control > Private Group > Private Group Membership.
8.
In the Group ID list, select the group ID.
9.
Use Port List to add the ports you selected to this private group.