Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
604
M6100, M5300, and M7100 Series Managed Switches
The port list displays when at least one group is configured.
10.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable information displayed on the screen.
Configure Protected Ports
If a port is configured as protected, it does not forward traffic to any other protected port on
the switch, but it does forward traffic to unprotected ports. You can configure the ports as
protected or unprotected. You need read-write access privileges to modify the configuration.
the switch, but it does forward traffic to unprotected ports. You can configure the ports as
protected or unprotected. You need read-write access privileges to modify the configuration.
To configure protected ports:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Security > Traffic Control > Protected Ports.
Table 219. Private Group Membership
Field
Description
Group Name
The name for the private group that you selected. It can be up to 24
non-blank characters long.
non-blank characters long.
Group Mode
The mode of the private group that you selected. The modes are as
follows:
follows:
•
community
•
isolated
When in isolated mode, the member port in the group cannot forward
its egress traffic to any other members in the same group. By default,
the mode is community mode. Each member port can forward traffic to
other members in the same group, but not to members in other groups.
its egress traffic to any other members in the same group. By default,
the mode is community mode. Each member port can forward traffic to
other members in the same group, but not to members in other groups.