Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
647
M6100, M5300, and M7100 Series Managed Switches
•
ACL Based on Destination MAC
. To create an ACL based on the destination MAC
address, destination MAC mask, and VLAN.
•
ACL Based on Source MAC
. To create an ACL based on the source MAC address,
source MAC mask, and VLAN.
•
ACL Based on Destination IPv4
. To create an ACL based on the destination IPv4
address and IPv4 address mask.
•
ACL Based on Source IPv4
. To create an ACL based on the source IPv4 address
and IPv4 address mask.
•
ACL Based on Destination IPv6
. To create an ACL based on the destination IPv6
prefix and IPv6 prefix length.
•
ACL Based on Source IPv6.
To create an ACL based on the source IPv6 prefix and
IPv6 prefix length.
•
ACL Based on Destination IPv4 L4 Port
. To create an ACL based on the
destination IPv4 Layer 4 port number.
•
ACL Based on Source IPv4 L4 Port
. To create an ACL based on the source IPv4
Layer 4 port number.
•
ACL Based on Destination IPv6 L4 Port
. To create an ACL based on the
destination IPv6 Layer 4 port number.
•
ACL Based on Source IPv6 L4 Port
. To create an ACL based on the source IPv6
Layer 4 port number.
Note:
Two rules are created (one for TCP and one for UDP) in the case of
L4 port options.
L4 port options.
Configure an ACL Based on Destination MAC Address
Note:
Binding ACLs to interface fails when the system has no resources to
bind a new ACL.
bind a new ACL.
To configure a rule based on destination MAC address:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.